4-35
(3) Entering a route number
a) Tap and enter a waypoint number.
b) Execute by tapping .
(4) Entering an event number
a) Tap and enter an event number.
b) Execute by tapping .
(5) Specifying the cursor position as the waypoint
a) When is tapped, a plotting screen is displayed.
b) Move the cursor to the waypoint and tap "WPT SET".
To create a route, repeat the operation b).
To delete a waypoint, tap “CLR”.
c) Tap "ROUTE SET".
Cancels GOTO processing
To Next Page
Loading...
