Jungheinrich EFX 413 User Manual

4.14.3 Rotation cut-out
Z
The EFX is fitted with a rotation cut-out as standard. The rotation cut-out disables
the "fork-carriage rotation" hydraulic function as soon as a load greater than 500 kg
is lifted above 2 m.
Symbols and function of the rotation
cut-out when the attachment is in home
position.
Requirements
– Attachment is in the home position, see
page 192.
– A load greater than 500 kg is on the load
handler.
– Load handler is raised above 2 m.
Procedure
• Symbol "rotation cut-out“ (171) is shown in the driver's display.
• The following hydraulic functions are enabled and can be performed:
• Lifting and lowering the load handler, see page 171.
• Attachment traverse, see page 177.
• The following hydraulic function is disabled and cannot be carried out:
• Fork carriage rotation.
Z
The "fork carriage rotation“ hydraulic function is released again when the load
handler has been lowered below 2 m.
171
179
04.19 en-GB

Jungheinrich EFX 413 Specifications

General

Brand	Jungheinrich
Model	EFX 413
Category	Trucks
Language	English