Juniper MX10003 - Replacing an MX10003 RCB

Interrupt 0 percent
Idle 99 percent
Start time 2017-08-19 23:31:33 PDT
Uptime 7 hours, 33 minutes, 29 seconds
Last reboot reason 0x2000:hypervisor reboot
Load averages: 1 minute 5 minute 15 minute
0.09 0.20 0.18
Routing Engine status:
Slot 1:
Current state Present
SEE ALSO
MX10003 Routing and Control Board (RCB) Description | 47
MX10003 RCB LEDs | 51
show chassis routing-engine
Replacing an MX10003 RCB
IN THIS SECTION
Removing an MX10003 RCB | 137
Installing an MX10003 RCB | 138
136