Juniper MX10003 Hardware Guide

NOTE: For a complete list of supported optics on MX10003, see MX10003 Transceivers.
SEE ALSO
MX10003 Cooling System Description | 31
MX10003 AC Power System Description | 35
MX10003 Router Physical Specifications | 64
MX10003 Hardware Components and CLI Terminology
The MX10003 router support the components in Table 4 on page 21, listed in alphabetic order.
Table 4: MX10003 Router Hardware Components and CLI Terminology
DescriptionCLI Name
Hardware Model
NumberComponent
“MX10003 Chassis Description”
on page 25
JNP10003 [MX10003]MX10003-BaseChassis
“MX10003 Cooling System
Description” on page 31
Cooling system, including fan modules and air filters
N/AJNP-AIRFLTR-3RUAir filter kit
Fan TrayJNP-FAN-3RUFan module
“MX10003 AC Power System
Description” on page 35
Power system components
•
JNP-PWR1600-AC
•
JNP-PWR1100-DC
•
JNP-PWR1600-AC
•
JNP-PWR1100-DC
Power supply module
Multi-Rate Ethernet MIC
•
MIC1
•
MIC1-MACSEC
•
Without MACsec
support: JNP-MIC1
•
With MACsec support:
JNP-MIC1-MACSEC
MIC
“MX10003 MPC (Multi-Rate)” on
page 53
LC2103MX10003-LC2103.MPC
21

Juniper MX10003 Specifications

General

Model	MX10003
Category	Network Router
Routing Engine	RE-MX10003
Throughput	2.4 Tbps
Operating System	Junos OS
Power Supply	AC or DC
Rack Units/Form Factor	3 U
Redundancy	Power supplies, fans
Slot Count	3