•
See “Powering On an AC-Powered MX10003 Router” on page 107.
•
See “Powering On a DC-Powered MX10003 Router” on page 108.
11. Install the air filter unit.
See “Replacing the MX10003 Air Filter Unit” on page 117.
12. Perform the initial system configuration.
See “Initially Configuring the MX10003 Router” on page 110.
RELATED DOCUMENTATION
MX10003 Router Rack Requirements | 66
MX10003 Router Clearance Requirements for Airflow and Hardware Maintenance | 63
MX10003 Router Cabinet Requirements and Specifications | 68
Tools and Parts Required to Unpack the MX10003
Router
To unpack the router and prepare for installation, you need the following tools:
•
Phillips (+) screwdriver, number 1, 2, and 3
•
1/2-in. or 13-mm open-end or socket wrench to remove bracket bolts from the shipping pallet
•
Blank panels to cover any slots not occupied by a component
RELATED DOCUMENTATION
Verifying the MX10003 Router Parts Received | 86
MX10003 Field-Replaceable Units | 24
Unpacking the MX10003 Router | 85
84
To Next Page
Loading...
