Table 13: AC Power Supply Electrical Specifications
SpecificationItem
AC high: 1600 W
AC low: 800 W
Maximum output power
Operating range:
90 through 140 VAC: 800 W
180 through 264 VAC: 1600 W
AC input voltage
50 through 60 Hz (nominal)AC input line frequency
10 A @ 100 VAC through 240 VACAC input current rating
SEE ALSO
Routine Maintenance Procedures for MX10003 Routers | 116
Replacing an MX10003 AC Power Supply | 127
General Safety Guidelines and Warnings | 177
General Electrical Safety Guidelines and Warnings | 206
Prevention of Electrostatic Discharge Damage | 182
AC Power Circuit Breaker Requirements for the MX10003 Router
We recommend that you use a dedicated customer-site circuit breaker rated for 15 A (110 VAC) minimum
or 10 A (220 VAC) minimum for each AC power feed, or as required by local code. Doing so enables you
to operate the router in any configuration without upgrading the power infrastructure.
SEE ALSO
Routine Maintenance Procedures for MX10003 Routers | 116
Replacing an MX10003 AC Power Supply | 127
Calculating Power Requirements for MX10003 Router | 70
General Safety Guidelines and Warnings | 177
38
To Next Page
Loading...
Need help?
General
