Juniper MX10003 Hardware Guide

Table 4: MX10003 Router Hardware Components and CLI Terminology (continued)
DescriptionCLI Name
Hardware Model
NumberComponent
“MX10003 Routing and Control
Board (RCB) Description” on
page 47
•
RE: RE-S-1600x8
•
CB: Control Board
•
JNP10003-RE1
•
JNP10003-RE1-LT
Routing and Control
Board (RCB)
Hardware Compatibility ToolXcvrSee MX Series Interface
Module Reference.
Transceiver
Table 5 on page 22 lists the spare parts and blank panels available for the router.
Table 5: MX10003 Spare Parts and Blank Panels
DescriptionModel Number
MX10003 chassis, spareJNP10003-CHAS
MX10003 fan module, spareJNP-FAN-3RU
MX10003 RE, spareJNP10003-RE1
JNP10003 RE, redundantJNP10003-RE1-R
MX10003 MPC, 6 quad small form-factor pluggable plus transceivers
(QSFP+), 1 MIC slot
JNP10003-LC2103
MX10003 AC power supply moduleJNP-PWR1600-AC
MX10003 AC power supply, 1600 W, redundantJNP-PWR1600-AC-R
MX10003 DC power supply, 1100 WJNP-PWR1100-DC
MX10003 DC power supply, 1100 W, redundantJNP-PWR1100-DC-R
MX10003 air filter assemblyJNP-FLTRDR-3RU
MX10003 air filterJNP-AIRFLTR-3RU
MX10003 RE blank cover panelJNP-RE-BLNK-3
MX10003 power blank cover panelJNP-PWR-BLNK-3
MX10003 LC2103 blank cover panelJNP-LC-BLNK-3
22

Juniper MX10003 Specifications

General

Model	MX10003
Category	Network Router
Routing Engine	RE-MX10003
Throughput	2.4 Tbps
Operating System	Junos OS
Power Supply	AC or DC
Rack Units/Form Factor	3 U
Redundancy	Power supplies, fans
Slot Count	3