Juniper MX10003 - Page 147

For more detailed output, add the detail option. The following example does not specify a slot number,
which is optional:
user@host> show chassis fpc detail
Slot 0 information:
State Online
Total CPU DRAM 3136 MB
Total RLDRAM 771 MB
Total DDR DRAM 18432 MB
Temperature 57 degrees C / 134 degrees F
Start time 2017-08-20 01:40:14 PDT
Uptime 5 hours, 14 minutes, 5 seconds
Max MPC base power consumption 910 Watts
Max MIC1 power consumption 0 Watts
Max MPC total power consumption 910 Watts
Slot 1 information:
State Online
Total CPU DRAM 3136 MB
Total RLDRAM 771 MB
Total DDR DRAM 18432 MB
Temperature 58 degrees C / 136 degrees F
Start time 2017-08-20 01:40:14 PDT
Uptime 5 hours, 14 minutes, 5 seconds
Max MPC base power consumption 910 Watts
Max MIC1 power consumption 0 Watts
Max MPC total power consumption 910 Watts
•
Issue the show chassis fpc pic-status CLI command. The MPC slots are numbered 0 and 1, bottom to
top:
user@host> show chassis fpc pic-status
Slot 0 Online LC2103
PIC 0 Online 6xQSFPP
PIC 1 Online MIC1
Slot 1 Online LC2103
PIC 0 Online 6xQSFPP
PIC 1 Online MIC1
For further description of the output from the command, see the CLI Explorer.
147