Keithley 2000 User Manual

This section contains reference information on programming the Model 2000 with the SCPI
commands. It is organized as follows:
SCPI Signal Oriented Measurement Commands — Covers the signal oriented measure-
ment commands. These commands are used to acquire readings.
SCPI command subsystems reference tables — Includes a summary table for each SCPI
subsystem command.
SCPI command subsystems — Includes additional information on each SCPI subsystem
command.
5-2 SCPI Command Reference

Keithley 2000 Specifications

General

Brand	Keithley
Model	2000
Category	Multimeter
Language	English