Keithley 2000 - Measurement Options

Introduction
This section describes the front panel features of the Model 2000. For those measurement op-
tions accessible only by a remote interface, refer to Sections 4 and 5. This section is organized
as follows:
•
Measurement configuration — Describes ranging, filtering, relative readings, digits of
resolution, and measurement rate.
•
Trigger operations — Uses a trigger model to explain trigger modes and sources.
•
Buffer operations — Discusses the reading storage buffer and buffer statistics.
•
Limit operations — Defines how to set reading limits.
•
Scan operations — Explains the internal and external scanning capabilities.
•
System operations — Gives details on setup saving and restoring, selecting a remote in-
terface, and accessing test and calibration.
3-2 Measurement Options