Options and accessories
The following options and accessories are available from Keithley for use with the Model
2000.
Scanner cards
Model 2000-SCAN:
This is a
10-channel scanner card that installs in the option slot of the
Model 2000. Channels can be configured for 2-pole or 4-pole operation. Included are two pairs
of leads for connection to Model 2000 rear panel inputs (Keithley P/N CA-109).
Model 2001-TCSCAN:
This is a thermocouple scanner card that installs in the option slot of
the Model 2000. The card has nine analog input channels that can be used for high-accuracy,
high-speed scanning. A built-in temperature reference allows multi-channel, cold-junction com-
pensated temperature measurements using thermocouples.
General purpose probes
Model 1754 Universal Test Lead Kit:
Consists of one set of test leads (0.9m), two spade
lugs, two banana plugs, two hooks, and two alligator clips.
Model 8605 High Performance Modular Test Leads:
Consists of two high voltage (1000V)
test probes and leads. The test leads are terminated with a banana plug with retractable sheath
on each end.
Model 8606 High Performance Probe Tip Kit:
Consists of two spade lugs, two alligator
clips, and two spring hook test probes. (The spade lugs and alligator clips are rated at 30V RMS,
42.4V peak; the test probes are rated at 1000V.) These components are for use with high perfor-
mance test leads terminated with banana plugs, such as the Model 8605.
The following test leads and probes are rated at 30V RMS, 42.4V peak:
Models 5805 and 5805-12 Kelvin Probes:
Consists of two spring-loaded Kelvin test probes
with banana plug termination. Designed for instruments that measure 4-terminal resistance. The
Model 5805 is 0.9m long; the Model 5805-12 is 3.6m long.
Model 5806 Kelvin Clip Lead Set:
Includes two Kelvin clip test leads (0.9m) with banana
plug termination. Designed for instruments that measure 4-terminal resistance. A set of eight
replacement rubber bands is available as Keithley P/N GA-22.
Model 8604 SMD Probe Set:
Consists of two test leads (0.9m), each terminated with a sur-
face mount device “grabber” clip on one end and a banana plug with a retractable sheath on the
other end.
General Information 1-5
To Next Page
Loading...
Need help?
General
