Keithley 2000 User Manual

SCPI
Standard Commands for Programmable Instruments (SCPI) is fully supported by the GPIB
and RS-232 interfaces. Always calibrate the Model 2000 multimeter using the SCPI language.
Keithley Models 196/199 Digital Multimeter
The Model 2000 multimeter implements virtually all commands available in the Keithley
Models 196/199 digital multimeter, except for the self-test and calibration commands. The com-
mands are listed in Appendix D.
See the Models 196/199 Digital Multimeter user manuals for more information about remote
programming.
Fluke Model 8840A/8842A Digital Multimeter
The Model 2000 Multimeter implements virtually all commands available in the Fluke Mod-
els 8840A and 8842A digital multimeter, except for the self-test and calibration commands. The
commands are listed in Appendix D.
See the Fluke user manual for more information about remote programming.
Remote Operation 4-5

Keithley 2000 Specifications

General

Brand	Keithley
Model	2000
Category	Multimeter
Language	English