:STATe <b>
:DISPlay[WINDow[1]]:TEXT:STATe <b> Control (on/off) message
Parameters <b> = 0 or OFF Disable text message
1 or ON Enable text message
Query :STATe? Query state of message mode.
Description This command enables and disables the text message mode. When enabled,
a defined message is displayed. When disabled, the message is removed
from the display.
A user defined text message remains displayed only as long as the instrument
is in remote. Taking the instrument out of remote (by pressing the LOCAL
key or sending LOCAL 16), cancels the message and disables the text mes-
sage mode.
SCPI Command Reference 5-27
To Next Page
Loading...
Need help?
General
