Keysight M8070A Programming Guide 119
SCPI Command Reference 5
Bit 0 - SymbolAlignmentLoss
Indicates whether the error detector(s) has experienced a symbol
alignment loss.
:STATus:QUEStionable:SYMBol:CONDition?
Syntax :STATus:QUEStionable:SYMBol:CONDition?
Description This query returns the contents of the condition register of the
Questionable Status Register (bit 12) to detect a symbol alignment loss.
:STATus:QUEStionable:SYMBol:ENABle[?]
Syntax :STATus:QUEStionable:SYMBol:ENABle <NRf>
:STATus:QUEStionable:SYMBol:ENABle?
Description This command sets the bits in the event enable register that can generate
a summary bit used for monitoring a symbol alignment loss. The query
returns the weighted value of the bits that are set in the event enable
register.
:STATus:QUEStionable:SYMBol[:EVENt]?
Syntax :STATus:QUEStionable:SYMBol[:EVENt]?
Description This command queries the contents of the Questionable Status event
register.
:STATus:QUEStionable:SYMBol:NTRansition[?]
Syntax :STATus:QUEStionable:SYMBol:NTRansition[?] <NRf>
Input
Parameters
<NRf>: Set transition filter state.
Description This command sets the transition filter state in the Questionable Status
Register structure. The query returns the weighted value of the bits that
are set to pass negative transitions in the transition filter.
To Next Page
Loading...
Need help?
General
