118 Keysight M8070A Programming Guide
5 SCPI Command Reference
:STATus:QUEStionable:PROTection[:EVENt]?
Syntax :STATus:QUEStionable:PROTection[:EVENt]?
Description This command queries the contents of the Questionable Status event
register.
:STATus:QUEStionable:PROTection:NTRansition[?]
Syntax :STATus:QUEStionable:PROTection:NTRansition <NRf>
:STATus:QUEStionable:PROTection:NTRansition?
Input
Parameters
<NRf>: Set transition filter state.
Description This command sets the transition filter state in the Questionable Status
Register structure. The query returns the weighted value of the bits that
are set to pass negative transitions in the transition filter.
:STATus:QUEStionable:PROTection:PTRansition[?]
Syntax :STATus:QUEStionable:PROTection:PTRansition <NRf>
:STATus:QUEStionable:PROTection:PTRansition?
Input
Parameters
<NRf>: Set transition filter state.
Description This command sets the transition filter state in the Questionable Status
Register structure. The query returns the weighted value of the bits that
are set to pass positive transitions in the transition filter.
:STATus:QUEStionable:SYMBol
The summary bit of this register set is reflected in bit 12 of the
Questionable Status Register.
The :STATus:QUEStionable:SYMBol contains conditions which reflect
states of the instrument’s normal operation. These are summary bits. For
example, if an error detector(s) of the instrument detects a symbol
alignment loss, the SymbolAlignmentLoss bit will be set.
The definition of each of these bits (condition register) is as follows:
To Next Page
Loading...
Need help?
General
