122 Keysight M8070A Programming Guide
5 SCPI Command Reference
:STATus:OPERation:CONDition?
Syntax :STATus:OPERation:CONDition?
Description This query returns the contents of the condition register of the Operation
Status Register structure.
:STATus:OPERation:ENABle[?]
Syntax :STATus:OPERation:ENABle <NRf>
:STATus:OPERation:ENABle?
Input
Parameters
<NRf>: Set enable mask.
Description This command sets the enable mask in the Operation Status Register
structure, which allows true conditions in the event register to be reported
in the summary bit. The query returns the weighted value of the bits that
are set in the enable register.
:STATus:OPERation[:EVENt]?
Syntax :STATus:OPERation[:EVENt]?
Description This query returns the content of Operation Status Event Register.
:STATus:OPERation:NTRansition[?]
Syntax :STATus:OPERation:NTRansition <NRf>
:STATus:OPERation:NTRansition?
Input
Parameters
<NRf>: Set transition filter state.
Description This command sets the transition filter state in the Operation Status
Register structure. The query returns the weighted value of the bits that
are set to pass negative transitions in the transition filter.
To Next Page
Loading...
Need help?
General
