Keysight Technologies J-BERT M8020A User Manual

148 Keysight M8070A Programming Guide
5 SCPI Command Reference
[:SOURce]:VOLTage:RANGe[:SELect][?]
Syntax [:SOURce]:VOLTage:RANGE[:SELect] ‘identifier’,
<R1|R2|R3|R4|R5|R6|R7|R8>
[:SOURce]:VOLTage:RANGE[:SELect]? ‘identifier’
Input
Parameters
‘identifier’: 'M*.DataOut1', 'M*.DataOut2', or 'M*.DataOut'
<R1|R2|R3|R4|R5|R6|R7|R8>: Select amplitude ranges.
Return Range R1|R2|R3|R4|R5|R6|R7|R8
Description Amplitude ranges guarantee a glitch free change of the amplitude value
within a specified range. The upper and lower limits of these ranges are
specified in the data sheet. Ranges are only specified for the DataOut
channel.
This SCPI is applicable for M8041A, M8051A, M8061A and M8062A.
Example :VOLT:RANG ‘M2.DataOut2’, R4
[:SOURce]:VOLTage:RANGe:AUTO[?]
Syntax [:SOURce]:VOLTage:RANGE:AUTO ‘identifier’, <ON|OFF|1|0>
[:SOURce]:VOLTage:RANGE:AUTO? ‘identifier’
Input
Parameters
‘identifier’: 'M*.DataOut1', 'M*.DataOut2', or 'M*.DataOut'
<ON|OFF|1|0>: Enable/disable auto tracking.
Return Range 1|0
Description Disable/enable the automatic tracking of the amplitude ranges.
This SCPI is applicable for M8041A, M8051A, M8061A and M8062A.
Example :VOLT:RANG:AUTO ‘M2.DataOut2’, off

Keysight Technologies J-BERT M8020A Specifications

General

Brand	Keysight Technologies
Model	J-BERT M8020A
Category	Control Unit
Language	English