Keysight Technologies J-BERT M8020A

Keysight M8070A Programming Guide 149
SCPI Command Reference 5
[:SOURce]:JITTer Subnode
This subnode has the following SCPI structure:
This subnode has the following commands:
Table 34
Name Description under
[:GLOBal][:STATe][?] [:SOURce]:JITTer[:GLOBal][:STATe][?] on
page 150
:CONFigure[:DELay][?] [:SOURce]:JITTer:CONFigure[:DELay][?] on
page 150
:CONFigure:HMODe[?] [:SOURce]:JITTer:CONFigure:HMODe[?] on
page 150
:HFRequency [:SOURce]:JITTer:HFRequency Subnode on
page 152
:LFRequency [:SOURce]:JITTer:LFRequency Subnode on
page 169
[:SOURce]
:JITTer
[:GLOBal]
[:STATe][?]
:CONFigure
[:DELay][?]
:HMODe[?]
:HFRequency
…
:LFRequency
…