Keysight M8070A Programming Guide 207
SCPI Command Reference 5
Input
Parameters
‘identifier’: 'M1.ClkOut', 'M1.TrigOut', 'M*.DataOut1', 'M*.DataOut2', or
'M*.DataOut'
<NRf>: Specify external termination voltage.
Return Range <NRf>
Description This command specifies the external termination voltage. The default is 0 V
(ground). Acceptable units include mV, V and exponents (for example,
700E-3 is the same as 700 mV).
This SCPI is applicable for M8041A, M8051A, M8061A, M8062A and
M8195A.
Example :OUTP:TVOL ‘M1.DataOut1’, 700mV
:OUTPut:TCONfig[?]
Syntax :OUTPut:TCONfig ‘identifier’, <BALanced|UNBalanced>
:OUTPut:TCONfig? ‘identifier’
Input
Parameters
‘identifier’: 'M1.ClkOut', 'M1.TrigOut', 'M*.DataOut1', 'M*.DataOut2', or
'M*.DataOut'
<BALanced|UNBalanced>: Specify balanced or unbalanced output.
Return Range BAL|UNB
Description This command selects the termination model for an output frontend:
BALanced - balanced or differential output.
UNBalanced - unbalanced with respect to ground (termination voltage).
This SCPI is applicable for M8041A, M8051A, M8061A and M8062A.
Example :OUTP:TCON ‘M2.DataOut2’, BAL
:OUTPut:COUPling[?]
Syntax :OUTPut:COUPling ‘identifier’, <AC|DC>
:OUTPut:COUPling? ‘identifier’
Input
Parameters
‘identifier’: 'M*.DataOut1', 'M*.DataOut2', or 'M*.DataOut'
<AC|DC>: Select output coupling.
Return Range AC|DC
To Next Page
Loading...
