Keysight M8070A Programming Guide 257
SCPI Command Reference 5
:INPut:ALIGnment:EYE:RESult:DELay?
Syntax :INPut:ALIGnment:EYE:RESult:DELay? ‘identifier’
Input
Parameters
‘identifier’: 'M*.DataIn1', 'M*.DataIn2' or M*DataIn
Description Returns the delay detected at the last alignment run.
This SCPI is applicable for M8041A, M8051A, M8062A and M8046A.
Example :INP:ALIG:EYE:RES:DEL? ‘M1.DataIn1’
:INPut:ALIGnment:EYE:RESult:POLarity?
Syntax :INPut:ALIGnment:EYE:RESult:POLarity? ‘identifier’
Input
Parameters
‘identifier’: 'M*.DataIn1', 'M*.DataIn2' or M*DataIn
Return Range NOR|INV
Description Returns the polarity of the signal detected at the last alignment run.
This SCPI is applicable for M8041A, M8051A, M8062A and M8046A.
Example :INP:ALIG:EYE:RES:POL? ‘M1.DataIn1’
To Next Page
Loading...
