Keysight Technologies J-BERT M8020A User Manual

270 Keysight M8070A Programming Guide
5 SCPI Command Reference
This SCPI is applicable for M8046A.
Example :N1000:CREC:REL "DCA1.SLOT1 ";*OPC?
For detailed documentation, see :CRECovery{n}:RELock in the FlexDCA
online help.
:N1000:CRECovery:SOURce[?]
Syntax :N1000:CRECovery:SOURce<identifier>,
{ELECtrical | EINVerted | DIFFerential | AUXilliary}
:N1000:CRECovery:SOURce?<identifier>
Input
Parameters
‘identifier’: ‘DCA*.SLOT*'
ELECtrical | EINVerted | DIFFerential | AUXilliary
Description This command selects the input of the clock recovery.
This query returns the present state.
This SCPI is applicable for M8046A.
Example :N1000:CREC:SOUR "DCA1.SLOT1 ",DIFF
For detailed documentation, see :CRECovery{n}:SOURce in the FlexDCA
online help.
NOTE
The re-lock operation can take quite some time. Especially when the
clock recovery cannot lock to the received signal. Therefore, the VISA
timeout shall be increased to well above 10 seconds to ensure that the
controlling program is waiting long enough for the re-lock operation to
finish.

Keysight Technologies J-BERT M8020A Specifications

General

Brand	Keysight Technologies
Model	J-BERT M8020A
Category	Control Unit
Language	English