Keysight Technologies J-BERT M8020A User Manual

354 Keysight M8070A Programming Guide
5 SCPI Command Reference
:PLUGin:OLEVel:FETCh:NOISe:PPEak?
Syntax :PLUGin:OLEVel:FETCh:NOISe:PPEak? ‘identifier’ [,‘Location’]
Input
Parameters
‘identifier’: Specify the measurement name.
[,‘Location’]: ‘M*.DataIn1’ or ‘M*.DataIn2’ (optional).
Description This command returns the value of the peak to peak noise level.
This SCPI is applicable for M8041A, M8051A and M8062A.
Example :PLUGin:OLEVel:FETCh:NOISe:PPEak? ‘MyMeasurement’
:PLUGin:OLEVel:FETCh:NOISe:HIGH:STDeviation?
Syntax :PLUGin:OLEVel:FETCh:NOISe:HIGH:STDeviation? ‘identifier’ [,‘Location’]
Input
Parameters
‘identifier’: Specify the measurement name.
[,‘Location’]: ‘M*.DataIn1’ or ‘M*.DataIn2’ (optional).
Description This command returns the value of the Q High Level Standard Deviation.
This SCPI is applicable for M8041A, M8051A and M8062A.
Example :PLUGin:OLEVel:FETCh:NOISe:HIGH:STDeviation? ‘MyMeasurement’
:PLUGin:OLEVel:FETCh:NOISe:LOW:STDeviation?
Syntax :PLUGin:OLEVel:FETCh:NOISe:LOW:STDeviation? ‘identifier’ [,‘Location’]
Input
Parameters
‘identifier’: Specify the measurement name.
[,‘Location’]: ‘M*.DataIn1’ or ‘M*.DataIn2’ (optional).
Description This command returns the value of the Q Low Level Standard Deviation.
This SCPI is applicable for M8041A, M8051A and M8062A.
Example :PLUGin:OLEVel:FETCh:NOISe:LOW:STDeviation? ‘MyMeasurement’

Keysight Technologies J-BERT M8020A Specifications

General

Brand	Keysight Technologies
Model	J-BERT M8020A
Category	Control Unit
Language	English