Keysight Technologies J-BERT M8020A User Manual

Keysight M8070A Programming Guide 365
SCPI Command Reference 5
:PLUGin:OLEVel:RUN:MESSage?
Syntax :PLUGin:OLEVel:RUN:MESSage? 'Identifier'
Input
Parameters
Identifier: 'MyMeasurement'
Description This command returns a string describing the state of an output level
measurement addressed by the measurement name identifier. Possible
states include NotStarted, Running, Suspended, Finished, Error, or
Stopped.
This SCPI is applicable for M8041A, M8051A and M8062A.
Example :PLUGin:OLEVel:RUN:MESSage? 'MyMeasurement'
:PLUGin:OLEVel:RUN:PROGress?
Syntax :PLUGin:OLEVel:RUN:PROGress? 'Identifier'
Input
Parameters
Identifier: 'MyMeasurement'
Return Range 0 to 1
Description This command returns a number in the range of 0.0 to 1.0 to indicate the
progress of an output level measurement addressed by the measurement
name identifier. A 0.0 indicates that the measurement has not started and
1.0 indicates the measurement is finished.
This SCPI is applicable for M8041A, M8051A and M8062A.
Example :PLUG:OLEV:RUN:PROGress? 'MyMeasurement'
:PLUGin:OLEVel:RUN:STATus?
Syntax :PLUGin:OLEVel:RUN:STATus? 'Identifier'
Input
Parameters
Identifier: 'MyMeasurement'
Return Range 0|1
Description This command returns the running status of an output level measurement
addressed by the measurement name identifier. A 0 indicates the
measurement is not running and a 1 indicates the measurement is
running.

Keysight Technologies J-BERT M8020A Specifications

General

Brand	Keysight Technologies
Model	J-BERT M8020A
Category	Control Unit
Language	English