366 Keysight M8070A Programming Guide
5 SCPI Command Reference
This SCPI is applicable for M8041A, M8051A and M8062A.
Example :PLUG:OLEV:RUN:STATus? 'MyMeasurement'
:PLUGin:OLEVel:RUN:HISTory[:STATe][?]
Syntax :PLUGin:OLEVel:RUN:HISTory[:STATe] 'Identifier', <0|1|OFF|ON>
:PLUGin:OLEVel:RUN:HISTory[:STATe]? 'Identifier'
Input
Parameters
Identifier: 'MyMeasurement'
Return Range 0|1
Description This command enables/disables the storage of output level measurement
results addressed by the measurement name identifier.
This query returns the current setting.
This SCPI is applicable for M8041A, M8051A and M8062A.
Example :PLUGin:OLEVel:RUN:HISTory[:STATe] 'MyMeasurement',1
:PLUGin:OLEVel:RUN:HISTory:CLEar
Syntax :PLUGin:OLEVel:RUN:HISTory:CLEar 'Identifier'
Input
Parameters
Identifier: 'MyMeasurement'
Description This command deletes the output level measurement history addressed by
the measurement name identifier.
This SCPI is applicable for M8041A, M8051A and M8062A.
Example :PLUGin:OLEVel:RUN:HISTory:CLEar 'MyMeasurement'
To Next Page
Loading...
