378 Keysight M8070A Programming Guide
5 SCPI Command Reference
Description This command is used to specify the compliance margin for the
measurement specified by the measurement name identifier. The default is
0%.
Compliance is used for checking that a device passes the minimum margin
required for compliance to a standard. Characterization tests a device for
tolerance to jitter to establish the pass/fail amplitude at each
measurement point.
This SCPI is applicable for M8041A, M8051A, M8061A, M8062A and
M8046A.
Example :PLUG:JTOL:MSET:CMAR ‘MyMeasurement’, 10
To Next Page
Loading...
