Keysight M8070A Programming Guide 401
SCPI Command Reference 5
:PLUGin:EDIagram:ACQuisition:ALOCation[?]
Syntax :PLUGin:EDIagram:ACQuisition:ALOCation 'Identifier', < location-string>
:PLUGin:EDIagram:ACQuisition:ALOCation? 'Identifier'
Input
Parameters
Identifier: 'ParameterSweep1'
<location-string>: ‘M*.DataIn*’
Description This command sets the location/location group string against which the
data acquisition is performed.
This query returns the current location/location group string against which
measurement is configured for the data acquisition.
This SCPI is applicable for M8041A, M8051A and M8062A.
Example :PLUG:EDI:ACQ:ALOC 'MyMeasurement',"M1.DataIn1"
:PLUGin:EDIagram:ACQuisition:NEYEs[?]
Syntax :PLUGin:EDIagram:ACQuisition:NEYEs 'Identifier', TDZ | ODF
:PLUGin:EDIagram:ACQuisition:NEYEs? 'Identifier',
Input
Parameters
Identifier: 'MyMeasurement'
Range TDZ | ODF
Description This command sets the number eyes to be displayed in UI. It can be either
1.5 or 2.0.
The query returns current value.
This SCPI is applicable for M8041A, M8051A and M8062A.
Example :PLUG:EDI:ACQ:NEYEs 'MyMeasurement', TDZ
To Next Page
Loading...
