426 Keysight M8070A Programming Guide
5 SCPI Command Reference
:PLUGin:PSWEep:ACQuisition:ALOCation[?]
Syntax :PLUGin:PSWEep:ACQuisition:ALOCation 'Identifier', <location-string>
:PLUGin:PSWEep:ACQuisition:ALOCation? 'Identifier'
Input
Parameters
‘Identifier’: Specify the plugin name. For e.g. ‘ParameterSweep1’
<location-string>: ‘M*.DataIn*’
Description This command sets the location or location group string against which the
data acquisition is performed.
This query returns the current location or location group string against
which measurement is configured for the data acquisition.
This SCPI is applicable for M8041A, M8051A, M8061A, M8062A, M8045A
and M8046A.
Example :PLUG:PSWE:ACQ:ALOC 'ParameterSweep1', "M1.DataIn1"
:PLUGin:PSWEep:ACQuisition:SLOCation[?]
Syntax :PLUGin:PSWEep:ACQuisition:SLOCation 'Identifier', <location-string>
:PLUGin:PSWEep:ACQuisition:SLOCation? 'Identifier'
Input
Parameters
‘Identifier’: Specify the plugin name. For e.g. ‘ParameterSweep1’
<location-string>: Specify the location/location group string against which
the sweep property needs to be performed. For e.g. ”M1.DataIn1”
Description This command sets the location/location group string against which the
sweep property needs to be performed.
This query returns the current sweep location/location group string from
which property is configured for the sweep.
This SCPI is applicable for M8041A, M8051A, M8061A, M8062A, M8045A
and M8046A.
Example :PLUG:PSWE:ACQ:SLOC 'ParameterSweep1', ”M1.DataIn1”
To Next Page
Loading...
Need help?
General
