Keysight Technologies J-BERT M8020A - Page 446

446 Keysight M8070A Programming Guide
5 SCPI Command Reference
:PLUGin:CCAPture:FETCh:PATTern:ERRor:SYMBol:FIRSt?
Syntax :PLUGin:CCAPture:FETCh:PATTern:ERRor:SYMBol:FIRSt?
'identifier' [,‘Location’]
Input
Parameters
identifier: ‘Name of Measurement’
[,‘Location’]: ‘M*.DataIn1’ or ‘M*.DataIn2’
Description This command fetches the first error symbol.
This SCPI is applicable for M8041A and M8051A.
Example :PLUGin:CCAPture:FETCh:PATTern:ERRor:SYMBol:FIRSt?
'MyMeasurement',‘M1.DataIn1’
Return: (“M1.DataIn1”, ...)
:PLUGin:CCAPture:FETCh:PATTern:ERRor:SYMBol:LAST?
Syntax :PLUGin:CCAPture:FETCh:PATTern:ERRor:SYMBol:LAST? 'identifier'
[,‘Location’]
Input
Parameters
identifier: ‘Name of Measurement’
[,‘Location’]: ‘M*.DataIn1’ or ‘M*.DataIn2’
Description This command fetches the last error symbol.
This SCPI is applicable for M8041A and M8051A.
Example :PLUGin:CCAPture:FETCh:PATTern:ERRor:SYMBol:LAST?
'MyMeasurement',‘M1.DataIn1’
Return: (“M1.DataIn1”, ...)