Keysight Technologies J-BERT M8020A User Manual

Keysight M8070A Programming Guide 467
SCPI Command Reference 5
:SYSTem:DCINterface:DEVice:CONNect[?]
Syntax :SYSTem:DCINterface:DEVice:CONNect ‘identifier’, <ON|OFF|1|0>
:SYSTem:DCINterface:DEVice:CONNect ‘identifier’?
Input
Parameters
‘identifier’: “DCI.Control”
Description This command relates to the DUT Control Interface hook functions
DUT_connect and DUT_disconnect.
When these functions are implemented by the currently used script (see
syst:dcin:load), then this command is controlling the Connection
parameter under the function Device for the Control location of the device
under test.
The location argument must be the Control location as full system location
identifier as displayed in the parameter editor (e.g. "DCI.Control").
This query returns the current setting.
Example :SYSTem:DCINterface:DEVice:CONNect ‘DCI.Control’, 1

Keysight Technologies J-BERT M8020A Specifications

General

Brand	Keysight Technologies
Model	J-BERT M8020A
Category	Control Unit
Language	English