Keysight M8070A Programming Guide 469
SCPI Command Reference 5
:SYSTem:DCINterface:LANE:MODE[?]
Syntax :SYSTem:DCINterface:LANE:MODE "Location", "mode"
:SYSTem:DCINterface:LANE:MODE? "Location"
Input
Parameters
‘Location’: ‘*.Lane*’
‘mode’: Individual modes or configurations.
Description This command relates to the DUT Control Interface hook functions
DUT_getLaneModes and DUT_setLaneMode.
When these functions are implemented by the currently used script (see
syst:dcin:load), then this command is controlling the Mode parameter
under the function Lane for the given lane of the device under test.
The location argument must be the Control location as full system location
identifier as displayed in the parameter editor (e.g. "DCI.Lane1").
The mode argument must be one of the strings returned by
DUT_getLaneModes.
This can be used to control configurations that are valid for an individual
lane or channel of the device under test.
When sending this command in one SCPI transaction with
:syst:dcin:dev:mode, then the device mode hook (DUT_setDeviceMode)
will be executed before the lane specific mode (DUT_setLaneMode).
This query returns the current setting.
Example :SYSTem:DCINterface:LANE:MODE ‘DCI.Lane1’,‘MODE1’
To Next Page
Loading...
Need help?
General
