Keysight N6705C - Page 271

Parameter Typical Return
(none) (none)
Calibrates the voltagecommon mode rejection ratio: CAL:VOLT:CMRR (@1)
CALibrate:VOLTage:LIMit:POSitive <value>, (@<channel>)
Calibrates the positive voltage limit. The value entered selects the range that is being calibrated.
Parameter Typical Return
The maximum voltage of therange. (none)
Calibrates the positive voltage limit: CAL:VOLT:LIM:POS 20.4, (@1)
CALibrate:VOLTage:MEASure <value>, (@<channel>)
Calibrates the voltage measurement range.The value entered selects the range that is being
calibrated.
Parameter Typical Return
The maximum voltage of therange. (none)
Calibrates the voltagemeasurement range: CAL:VOLT:MEAS 51, (@1)
CALibrate:VOLTage:MEASure:AUXiliary (@<channel>)
Calibrates the auxiliary voltage measurement input.
Parameter Typical Return
(none) (none)
Calibrates the auxiliary voltagemeasurement input: CAL:VOLT:MEAS:AUX (@1)
Keysight N6705C Operating and Service Guide 271
7 SCPI Programming Reference