The return format depends on the settings of the FORMat:BORDer and FORMat[:DATA] commands.
When the data format is set to ASCII, returned values are comma separated. When the data format is
set to REAL, data is returned as single precision floating point values in definite length arbitrary block
response format.
Parameter Typical Return
(none) <value> [,<value>]
or <Block>
Returns the measured currentarray MEAS:ARR:CURR? (@1)
Returns the measured power array MEAS:ARR:POW? (@1)
Returns the measured voltage array MEAS:ARR:VOLT? (@1)
Keysight N6705C Operating and Service Guide 303
7 SCPI Programming Reference
To Next Page
Loading...
