SYSTem:COMMunicate:RLSTate LOCal|REMote|RWLock
SYSTem :COMMunicate:RLSTate?
Configures the remote/local state of the instrument.
Remote and Local do the same thing and are included for compatibility with other products. Both
allow front panel control.
RWLock disables the front panel keys. Then the instrument can only be controlled remotely.
Parameter Typical Return
LOCal|REMote|RWLock, default LOCal LOC, REM, or RWL
Sets the remote/local state to remote: SYST:COMM:RLSTREM
l The remote/local state is unaffected by *RST or any SCPI commands other than SYSTem:COMMu-
nicate:RLState.
l The remote/local instrument state can also be set by other interface commands over the GPIB
and some other I/O interface.
l When multiple remote programming interfaces are active, the interface with the most recently
changed remote/local state determines the instrument’s remote/local state.
SYSTem:COMMunicate:TCPip:CONTrol?
Returns the initial socket control connection port number. After the control port number is obtained, a
control socket connection can be opened.
Parameter Typical Return
(none) 5000 (0 if sockets are not supported)
Query the Control connection portnumber: SYST:COMM:TCP:CONT?
l The control socket connection can only be used by a client to send a Device Clear to the instru-
ment or to detect Service Request (SRQ) events.
l Refer to Using Sockets for more information.
SYSTem:DATE <yyyy>, <mm>, <dd>
SYSTem:DATE?
Sets the date of the real time clock in year (yyyy), month (mm), and day (dd). The query returns
comma-separated values that correspond to the year, month, and day.
Parameter Typical Return
<yyyy>: A 4-digitinteger representing the year
<mm>: An integer from 1 to 12
<dd>: An integer from 1 to 31
<year, month, day>
Set the date January 1, 2016: SYST:DATE 2016,1,1
Keysight N6705C Operating and Service Guide 333
7 SCPI Programming Reference
To Next Page
Loading...
