386 Keysight Technologies N9040B UXA Signal Analyzer Service Guide
Assembly Replacement Procedures
RF Area - Options 508, 513, 526
3. Refer to Figure 15-35 and Figure 15-36. Replace cables W8, W16, W17,
W18, W21 W30, and W33. Torque to 10 inch-pounds.
Figure 15-35 Front End Assembly Cables Replacement - Options 508, 513, 526
Figure 15-36 Front End Assembly Side Cables Replacement - Options 508, 513, 526
To Next Page
Loading...
