Recall Settings
Recall Settings allows you to browse to the file to be recalled. Use the arrow keys to navigate to the
desired state file (*.sta) or preferences file (*.prf).
Power On
Power On selects the state that is loaded at power-up. This can be either the state when the instrument
was powered down with the power switch (Last), a user-selected state file (User Defined), or the factory
default state (Factory Defaults).
Set to Defaults
Set to Defaults loads the instrument's factory default state or preference settings.
Keysight Truevolt Series Operating and Service Guide
141
Features and Functions
To Next Page
Loading...
