Keysight Truevolt Series - Reading Memory Commands

Statistics
CALCulate:AVERage:ALL?
CALCulate:AVERage:AVERage?
CALCulate:AVERage:CLEar[:IMMediate]
CALCulate:AVERage:COUNt?
CALCulate:AVERage:MAXimum?
CALCulate:AVERage:MINimum?
CALCulate:AVERage:PTPeak?
CALCulate:AVERage:SDEViation?
CALCulate:AVERage[:STATe] {OFF|ON}
CALCulate:AVERage[:STATe]?
Smoothing
CALCulate:SMOothing:RESPonse {SLOW|MEDium|FAST}
CALCulate:SMOothing:RESPonse?
CALCulate:SMOothing[:STATe] {OFF|ON}
CALCulate:SMOothing[:STATe]?
Trend Chart
CALCulate:TCHart[:STATe] {OFF|ON}
CALCulate:TCHart[:STATe]?
Reading Memory Commands
DATA:LAST?
DATA:POINts:EVENt:THReshold <count>
DATA:POINts:EVENt:THReshold?
DATA:POINts?
DATA:REMove? <num_readings> [,WAIT]
FETCh?
R? [<max_readings>]
SCPI Programming Reference
444
Keysight Truevolt Series Operating and Service Guide