Keysight Truevolt Series User Manual

Math - Limits
Limit checking indicates how many samples have exceeded specified limits and visually indicates when the
limits are exceeded.
Front Panel Menus
The limits menu is accessed from the [Math] menu.
The first softkey enables or disables limits. The second and third softkeys specify the limits either as high
and low values or as a span around a center value. For example, a Low limit of -4 V and a High limit of +7 V
are equivalent to a Center of 1.5 V and a Span of 11 V.
The Beeper softkey enables or disables beeping when limits are violated (this also enables or disables the
beeper for the other functions that use the beeper - probe hold, diode, continuity, and errors. Clear Condi-
tion resets the limit borders to green, as described below.
Features and Functions
110
Keysight Truevolt Series Operating and Service Guide

Keysight Truevolt Series Specifications

General

Brand	Keysight
Model	Truevolt Series
Category	Measuring Instruments
Language	English