Keysight Truevolt Series - Calculate Subsystem Introduction

CALCulate Subsystem Introduction
The CALCulate subsystem receives real-time data from the measurement hardware and sends them to
reading memory. It also optionally performs the following math operations, as shown in the diagram
below:
l Smoothing
l Scaling
l Statistics
l Limit checking
l Histogram
Only calculations enabled by CALC:SCAL:STAT, CALC:TRAN:HIST:STAT, CALC:LIM:STAT, and
CALC:AVER:STAT are performed.
Parts of the CALCulate Subsystem
CALCulate:CLEar[:IMMediate]
AVERage Subsystem
SCPI Programming Reference
210
Keysight Truevolt Series Operating and Service Guide