Keysight Truevolt Series - Data Transfer Commands

Data Transfer Commands
MMEMory:DOWNload:DATA <binary_block>
MMEMory:DOWNload:FNAMe <file>
MMEMory:DOWNload:FNAMe?
MMEMory:FORMat:READing:CSEParator {COMMa|SEMicolon|TAB}
MMEMory:FORMat:READing:CSEParator?
MMEMory:FORMat:READing:INFormation {OFF|ON}
MMEMory:FORMat:READing:INFormation?
MMEMory:FORMat:READing:RLIMit {OFF|ON}
MMEMory:FORMat:READing:RLIMit?
MMEMory:STORe:DATA RDG_STORE, <file>
MMEMory:UPLoad? <file>
IEEE-488 Commands
*CAL?
*CLS
*ESE <enable_value>
*ESE?
*ESR?
*IDN?
*LRN?
*OPC
*OPC?
*OPT?
*PSC {0|1}
*PSC?
*RCL {0|1|2|3|4}
*RST
*SAV {0|1|2|3|4}
*SRE <enable_value>
*SRE?
*STB?
*TRG
*TST?
*WAI
Keysight Truevolt Series Operating and Service Guide
447
SCPI Programming Reference