SCPI Programming Reference
This section contains information to help you program the Keysight Truevolt Series digital multimeters
over a remote interface using the SCPI programming language.
Introduction to the SCPI Language
Commands by Subsystem
Command Quick Reference
SCPI Error Messages
Power-On and Reset State
Related Information
IO Libraries and Instrument Drivers
The Keysight IO Libraries Suite software and installation instructions are on the Keysight Automation
Ready CD-ROM provided with your instrument (optional for 34460A).
Keysight Truevolt Series Documentation
The latest product documentation is available at www.keysight.com/find/truevolt-doc. For doc-
umentation for mobile devices, see www.keysight.com/find/truevolt-mobilehelp.
For information about connecting instruments to USB, LAN and GPIB interfaces and how to configure and
troubleshoot these interfaces, refer to Keysight IOLibraries help. The Keysight IOLibraries can be down-
loaded from www.keysight.com/find/iosuite.
Web Interface
The 34461A/65A/70A and the 34460A (with option 34460A-LAN or option 3446LANU) have a Web Inter-
face built into the instrument. You can use this interface over LAN for remote access and control of the
instrument via a Web browser. See Web Interface for details.
SCPI Programming Reference
194
Keysight Truevolt Series Operating and Service Guide
To Next Page
Loading...
