ROUTe:TERMinals?
Indicates which input terminals are selected on the 34461A front panel Front/Rear switch. This switch is
not programmable; this query reports the position of the switch, but cannot change it.
Do not toggle the Front/Rear switch with active signals on the terminals. This switch is
not intended to be used in this way and may be damaged by high voltages or currents,
possibly compromising the instrument's safety features.
Parameter Typical Return
(none) FRON or REAR
Return the state of the Front/Rear switch:
ROUT:TERM?
l On the 34460A, this query always returns FRON.
Keysight Truevolt Series Operating and Service Guide
207
SCPI Programming Reference
To Next Page
Loading...
Need help?
General
