Keysight Truevolt Series User Manual

DNS Server
DNS (Domain Name Service) is an Internet service that translates domain names into IP addresses. The
DNS server address is the IP address of a server that performs this service.
l Normally, DHCP discovers DNS address information; you only need to change this if DHCP is unused
or not functional. Contact your LAN administrator for details.
l This setting is non-volatile; it will not be changed by power cycling or *RST or SYSTem:PRESet.
l
Front Panel:[Utility] > I/O Config > LAN Settings > Modify Settings
Then set the first softkey to Manual and press More and Primary DNS or Second DNS to enter a DNS
address using the front panel arrow keys.
l
SCPI: SYSTem:COMMunicate:LAN:DNS[{1|2}] "<address>"
l
If you change this parameter, you must either press the Apply Changes softkey (front panel) or send
SYSTem:COMMunicate:LAN:UPDate (remote interface) for the change to take effect.
Current Configuration (LAN)
l
Press [Utility] > I/O Config > LAN Settings to view the MAC address and current LAN configuration.
There is no equivalent SCPI command.
l If the instrument goes into remote, all LAN changes will be canceled and the display will go to a dif-
ferent screen. Re-selecting the LAN Settings page will display the new settings if a LAN restart took
place.
Web Interface
The instrument includes a built-in Web Interface for remote instrument access and control over LAN via a
Web browser. For details, see Web Interface.
Keysight Truevolt Series Operating and Service Guide
31
Introduction to the Instrument

Keysight Truevolt Series Specifications

General

Brand	Keysight
Model	Truevolt Series
Category	Measuring Instruments
Language	English