Keysight Truevolt Series User Manual

LXI:RESet
Resets LAN settings to a known operating state, beginning with DHCP, and clears the Web Interface pass-
word. If DHCP fails, it uses Auto-IP.
Parameter Typical Return
(none) (none)
Reset the LANsettings:
LXI:RES
l Depending on your network, the LAN interface may take several seconds to restart after this command
is sent.
l If the LAN interface or specific LAN services (VXI-11, sockets, and so on) have been disabled by
SYSTem:COMMunicate:ENABle, you must separately re-enable the interface or services and cycle
instrument power for the LAN to be operational.
LXI:RESTart
Restarts the LAN with the current settings as specified by the SYSTem:COMMunicate:LAN commands.
Parameter Typical Return
(none) (none)
Restart the LANinterface:
LXI:REST
l Depending on your network, the LAN interface may take several seconds to restart after this command
is sent.
l If the LAN interface or specific LAN services (VXI-11, sockets, and so on) have been disabled by
SYSTem:COMMunicate:ENABle, you must separately re-enable the interface or services and cycle
instrument power for the LAN to be operational.
Keysight Truevolt Series Operating and Service Guide
279
SCPI Programming Reference

Keysight Truevolt Series Specifications

General

Brand	Keysight
Model	Truevolt Series
Category	Measuring Instruments
Language	English