+635,"Self-test failed; high DC zero"
+636,"Self-test failed; +7V reference"
+637,"Self-test failed; -10V reference"
+638,"Self-test failed; x1 gain, zero input"
+639,"Self-test failed; x10 gain, zero input"
+640,"Self-test failed; x100 gain, zero input"
+641,"Self-test failed; precharge"
+642,"Self-test failed; x1 gain, non-zero input"
+643,"Self-test failed; x10 gain, non-zero input"
+644,"Self-test failed; x100 gain, non-zero input"
+645,"Self-test failed; 100uA current source"
+646,"Self-test failed; 10uA current source"
+647,"Self-test failed; 2 ohm shunt"
+648,"Self-test failed; AC offset"
+649,"Self-test failed; frequency input"
+650,"Self-test failed; input switch"
+651,"Self-test failed; autocal 10 V range full scale"
+652,"Self-test failed; autocal 10 V range tenth scale"
+653,"Self-test failed; autocal 1 V range full scale"
+654,"Self-test failed; autocal 1 V range tenth scale"
+655,"Self-test failed; autocal 100 mV range full scale"
+656,"Self-test failed; autocal 100 V range reference"
+657,"Self-test failed; autocal 10 kOhm range full scale"
+658,"Self-test failed; autocal 10 kOhm range tenth scale"
+659,"Self-test failed; autocal 1 kOhm range full scale"
+660,"Self-test failed; autocal 100 kOhm tenth scale"
+661,"Self-test failed; autocal 1 MOhm half scale"
+662,"Self-test failed; autocal 100 KOhm to 1 MOhm transfer"
+663,"Self-test failed; autocal 1 MOhm to 10 MOhm transfer"
+664,"Self-test failed; autocal 10 MOhm internal resistor"
+665,"Self-test aborted; high ac voltage present on input terminals"
SCPI Programming Reference
470
Keysight Truevolt Series Operating and Service Guide
To Next Page
Loading...
