84 TOS5300
Specifications
Outline drawing
Unit: mm (inch)
TOS5300 TOS5301 TOS5302
Dimensions See ”Outline drawing.”
Weight Approx. 14 kg (30.9 lb.) Approx. 15 kg (33.1 lb.) Approx. 14 kg (30.9 lb.)
Accessories Power cord 1 pc.
High-voltage test lead (TL31-TOS) 1 set (1 red wire and 1 black wire, each with alligator clips); 1.5 m
D-sub 25-pin plug 1 set ; assembly type
High-voltage warning sticker 1 pc.
User’s manual 1 pc.
CD-R
5
1 pc.
1 Limited to products that have the CE mark on their panels. Does not apply to specially ordered or modified TOS5300 Series testers.
2 This is a Class A equipment. This product is intended for use in an industrial environment. This product may cause interference if used in
residential areas. Such use must be avoided unless the user takes special measures to reduce electromagnetic emissions to prevent
interference to the reception of radio and television broadcasts.
3 This is a Group 1 equipment. This product does not generate and/or use intentionally radio-frequency energy, in the form of
electromagnetic radiation, inductive and/or capacitive coupling, for the treatment of material or inspection/analysis purpose.
4 This is a Class I equipment. Be sure to ground this product’s protective conductor terminal. The safety of this product is only guaranteed
when the product is properly grounded.
5 Contains the User’s Manual, the Communication Interface Manual, the KI-VISA library, the Instruments Driver (IVI-COM) and the Safety
evaluation test.
MAX 20 (0.79)
MAX 420 (16.54)
350 (13.78)
250 (9.84)
265 (10.43)
38 (1.50)
294 (11.57)
320 (12.60)
MAX 330 (12.99)
132 (5.20)
MAX 150 (5.91)
To Next Page
Loading...
