Kinco FD5 AC series servo driver user manual Chapter 2 Servo system installation requirements and notes
14
Figure 2-4 FD625-
□
A Product installation drawing
2.1.2 Installation distance and direction
Please install the servo drive vertically and drill holes according to the Hole Position for Fixation ， There
should be an installation gap of more than 20mm between two drives. There should be a gap of more than
20mm between the first and last two drives and the wall or cabinet.
FD425 use passive cooling method. There is no fan in the drive. When installing, please reserve enough space
for heat dissipation.
To Next Page
Loading...
