Preface and Product Confirmation
Thank you for using Kinco FD5 series of servo products.
FD5 series AC servo is an economical product launched by Kinco for the general servo market, with a power range
between 200W to 3KW. The new generation servo products support CANopen, EtherCat, Modbus, Profinet and
other communication protocols. The servo products can be widely used in logistics, 3C electronics, printing and
packaging, textile machinery, woodworking machinery, lithium batteries and new energy automobile industry.
Please read the manual carefully and follow the operating instructions, it can help you set up the drive correctly
and make the drive perform optimally.
The accessories of different models of Kinco FD5 series drives are different. We recommend that you confirm
the product carefully before use.
Confirmation
Please confirm whether the product is damaged during transportation
Please confirm the motor model, drive model, and motor wiring model are consistent with the model you
ordered according to the nameplate information on the drive and motor.
Please confirm whether the terminal accessories of the drive is complete, and the motor oil seal and keys
are complete on the drive.
Accessories with quantity
FD425-PA-000
FD425-CA-000
FD425-LA-000
Main power terminal (including auxiliary wiring tools)*1, D-sub36P plug*1,
certificate*1, service guide*1, desiccant*1
FD435-CA-000
FD435-LA-000
FD435-PA-000
FD625-CA-000
FD625-LA-000
FD625-PA-000
4P power line terminals*1, 9P main power terminals (including auxiliary wiring tools
and short wires)*1, D-sub36P plug*1, certificate of conformity*1, service guide*1,
desiccant*1
If there is any problem with any of the above, please contact Kinco or your supplier to solve it.
To Next Page
Loading...
