Kinco FD5 Series - 3.4.3 Pulse instruction input

Kinco FD5 AC series servo driver user manual Chapter 3 Servo system interface and wiring
36
Digital output wiring
example
②
When the
host computer is
optocoupler input
3.4.3 Pulse instruction input
Table 3-12 Pulse input wiring example
Instruction
Pulse input is divided into ordinary pulse input channel and high-speed pulse
input channel High-speed pulse input channel support RS422 differential
signal, voltage range DC3.3-5V, the highest pulse frequency 4MHz Ordinary
pulse input channel support TTL/ differential signal, voltage range DC 3.3-
30V, the highest frequency 500KHz
Ordinary pulse input wiring
example①
NPN Wiring method