Kinco FD5 Series - 3.3 RS232 serial port

Kinco FD5 AC series servo driver user manual Chapter 3 Servo system interface and wiring
31
3.3 RS232 serial port
Table 3-6 RS232 serial port
Table 3-7 RS232 communication wiring method
Drive side
pin name
Drive side
pin number
PC side signal name
PC side serial port pin number
PC side pin difiniation
TX
3
Receive data (RXD)
2
RX
2
Send data (TXD)
3
GND
5
Signal ground(GND)
5
Users can purchase the FD5P drive Mini-usb 5p to DB9 female RS232 cable (Kinco order number:
PDC-USB-1(5)) If your computer does not have an RS232 serial port, you will also need to use a USB to DB9 serial cable to
connect.
Figure 3-16
FD5 Drive 232 debug cable

Purchase link of Kinco official Tmall store：
https://detail.tmall.com/item.htm?spm=a212k0.12153887.0.0.4d7c687deB8shy&id=652422874770
&skuId=4707119953745
Note: The figure above is the definition of the
232 bus on the drive
Pin number
Pin definition
Function
3
TX
Drive sending data
5
GND
Signal Ground
2
RX
Drive receives data