Kinco FD5 Series - 2.1.2 Installation distance and direction

Kinco FD5 AC series servo driver user manual Chapter 2 Servo system installation requirements and notes
16
Danger
！
 Please make sure that the drive is installed securely and the screws are tightened to prevent the
drive from falling and hurting people during use.
 Beware of electric shock ：
-
The power cable must be installed to the plug (X3).
-
Turn off the power when connecting cables.
- Touching live parts can cause serious injury and possibly death.

When using this product, it must be installed in the electric box, and all protective measures
have been activated.

In the event of maintenance, repair, cleaning work and longtime shutting down
，
beware before
touching live parts
：
- Turn off power to electrical equipment with the power switch and prevent it from turning on again
-
After the power is turned off, check the indicators on the front panel of the unit. If the light is off,
you can touch the drive.
- When installing, avoid any foreign objects entering the servo drive. Conductive or combustible
foreign objects such as screws, metal chips, etc. entering the servo drive may cause fire and
electric shock.
- For safety reasons, please do not use damaged servo drives and servo motors.
- Drive and motor power cables, brake cables and encoder cables must be fixed and not stretched
excessively.
-
The servo drive must be grounded.
2.1.3 Drive requirements
 Please ensure that this document is provided to design engineers, installers, and persons responsible for commissioning and
using machine or system of this product.
 Please ensure that the requirements of this document are always followed. And please consider the instructions for other
components and modules connected to this product.
 Please consider local legal requirements, as well as:
—Regulation and standards
—Regulations for testing organizations and insurance companies
—National standard specification
Transportation and storage requirements

Please ensure that the product is not overburdened during transportation and storage, including
—Mechanical load
—Temperature that exceeding the limit value
—Moisture
—Corrosive gases

Please use the original packaging for storage and transportation, the original packaging provides sufficient protection to avoid
common problems.